Rollover Car Wash Machine with Soft Foam Brushes and Computer Control
This rollover car wash machine cleans the parked car with soft foam brushes. HeyCar builds it in Wuhan.
HeyCar also calls it a reciprocating computer car washing machine.
The driver parks and stays put. Then the gantry travels back and forth over the vehicle.
Because brushes touch the paint, it removes heavier dirt than a touchless washer.
Who this rollover car wash machine is for
- Gas stations that want an automatic wash with one operator and a small footprint.
- Car wash investors moving from hand washing to an automatic bay.
- Garages and dealers that clean sedans, SUVs and luxury cars every day.
- Sites with muddy or dusty traffic where touchless washing leaves a film behind.
In fact, HeyCar can tailor the machine to your site, because it designs to the dimensions you provide.
How the wash cycle works
- The driver parks the car inside the gantry and switches off the engine.
- The operator selects a pre-set wash programme on the computer control.
- Intelligent sensors detect the contours and size of the vehicle.
- The gantry travels back and forth while the EVA foam brushes clean the body.
- When the programme ends, the gantry returns and the driver leaves.
Meanwhile, one operator can supervise the whole cycle. You can also adjust settings for different car types.
Key features
- New-generation EVA foam brushes — soft and tough, with no water absorption and no sand retention.
- Paint-friendly cleaning — the brushes do not damage car paint and do not fall off easily.
- Wear- and ageing-resistant brushes — so you replace them less often.
- Computer control — pre-set programmes plus adjustable settings for each type of wash.
- Intelligent sensors — the machine follows the shape of sedans, SUVs and luxury cars.
- Imported main components — a low failure rate and a long service life.
- Copper and stainless steel — a solid structure with good anti-rust performance.
- Energy-saving design — low operating cost and low repair cost.
- Small footprint — easy operation, flexible functions and a high degree of automation.
Technical specifications
| Type | Rollover / reciprocating gantry brush machine |
|---|---|
| Model | HeyCar Rollover (SKU HC-RO) |
| Size | 368 × 308 × 245 cm |
| Material | Copper and stainless steel |
| Brushes | New-generation EVA foam brushes |
| Control | Computer control, pre-set programmes, adjustable settings |
| Sensors | Detect vehicle contours and dimensions |
| Vehicle types | Sedans, SUVs, luxury cars |
| Throughput (HeyCar FAQ, computerized machines) | 20–50 cars per hour |
| Water use (HeyCar FAQ, computerized machines) | 70–150 L per car |
| Operators | One |
| Place of origin | China |
| Warranty | One year |
Site and installation requirements
The standard machine measures 368 × 308 × 245 cm. However, HeyCar can build it to your site size.
Your bay must also leave room for the car and for the gantry to travel over it.
Before quoting, prepare answers to these questions:
- What are the exact length, width and clear height of your bay?
- Which power supply do you have, including voltage and phase?
- Is your water supply steady enough for 70–150 L per car at peak hours?
- Do you have drainage and a sludge trap, or will you build them?
- Do you need a building or roof, or will the machine stand under an existing canopy?
Power and water connection details are confirmed in the quotation, so share your site data early.
Running costs per car
According to the HeyCar FAQ, the machine uses 70–150 L of water per car.
Since one operator runs it, labour cost per car stays low compared with a hand-wash team.
For example, hand washing takes about 10 minutes per car. By contrast, computerized machines wash 20–50 cars per hour.
Your quotation also lists chemical and power use, because these depend on programme choice and local supply.
How the rollover car wash machine compares
| Rollover | 5-Brush Tunnel | Series 5 | |
|---|---|---|---|
| Method | Gantry with foam brushes | Five brushes in sync | Touchless high pressure |
| Dirt removal | Heavier dirt than touchless | Heavier dirt than touchless | Lighter dirt |
| Typical site | Garages, smaller stations | Major gas stations | Touchless sites |
For busier gas stations, look at the HeyCar 5-Brush Tunnel with five brushes working at once.
If customers prefer no paint contact, compare the touchless HeyCar Series 5.
You can also browse all brush and rollover car wash machines.
Honest limits
- Dead spots such as wheel hubs, door handles and mirrors may need a quick touch-up by hand.
- The machine does not clean interiors, so plan a vacuum or steam station for that service.
- Some owners of new cars prefer touchless washing, even with soft foam brushes.
What you get with your order
The quotation lists the full package, including the gantry, brushes and control system.
In addition, you can ask for spare brushes and parts to keep on site.
Pricing and quotation
The listed price is per set, machine only. Shipping, import duties, installation and civil works vary by destination.
Tap the Request a Quote on WhatsApp button on this page. Then share your country, bay size and power supply.
You can also use the contact page or read the general FAQs.
Frequently asked questions
How many cars can a rollover car wash machine wash per hour?
HeyCar’s FAQ gives 20–50 cars per hour for computerized machines. Actual speed depends on the programme you choose.
Will the foam brushes scratch paint?
No. The EVA foam brushes do not absorb water or hold sand. Therefore, they do not damage car paint.
Can HeyCar adjust the machine to my bay?
Yes. HeyCar designs the machine to the site dimensions you provide.
What warranty comes with this model?
The listed warranty for this model is one year. The quotation confirms the exact terms.














